Dandong Tongda Science & Technology Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. wang Helen
  • Company Name : Dandong Tongda Science & Technology Co., Ltd.
  • Tel : 86-0415-6153617
  • Fax : 86-0415-6153217
  • Address : Liaoning,dandong,Jixian Street, Zhenxing District, Dandong, No. 17
  • Country/Region : China
  • Zip : 118303

x-ray crystal orientation analyzer

x-ray crystal orientation analyzer
Product Detailed
Related Categories:Testing Equipment
x-ray crystal analyzer 1.Power supply: single phase 220V, 50HZ 2.sample rotate angle -10d to +50d

x-ray crystal analyzer

FeatureSimple, does not require professional knowledge and technical skill, the figures point of view, easy to observe, to reduce the reading error, the display can be zero at any location, easy to show that the chip angle of deviation. Dual goniometer can work simultaneously to improve efficiency. Peak amplification with special integrator. Improve the detection accuracy. X-ray tube and high voltage integrated, increasing the reliability of high voltage, high voltage detector module with DC high voltage, vacuum suction sample plate, improved accuracy and speed of goniometer

Equipment Use

Temperature 2º-30ºNot more than 70% relative humidityPower supply: single phase 220V, 50HZ, power supply voltage fluctuations not more than ±10%, power capacity not less than 0.5KVA, have a good grounding, grounding resistance of less than 4Power lines may not have welding, high frequency furnace and other equipment and arc caused by high-frequency interferenceTYX-200Accuracy of ±30 s, displayed as digital. Minimum reading of 10sTYX-300By ray double crystal diffraction, precision ±15s, displayed for the digital, the smallest reading is 1sTYX-2H8TYX-200 in the original, based on improved goniometer structure, increasing the load-bearing track, X-ray tube sets, frame body, the sample sets increased sample stage height of 100mm, measurable 1-30 public nearly 2-8-inch diameter Sample. Angle display: number manner, measurement accuracy ±30sTYX-2H8 can be equipped with X-ray crystal direction finderTA-type goniometer

Designed by a round rod lens, samples stage with a load-bearing track, can weigh 1-30kg,2-6 inches in diameter(can be increased to 8-inch) crystal rod, the samples has really set the stage suction device increases. The model measures the rod crystal goniometer reference plane, but also measure the sheet surface of the chip.TB-type goniometerDesigned by a round rod lens, sample stage with a load-bearing track, and add a V-bearing guide, can weigh 1-30 kg, 2-6 inches in diameter (can be increased to 8 inches), length 500mm crystal rod, the platforms are really in the air sample device, the type goniometer measurable rod crystal face, but also measure the sheet surface of the chip

TC-type goniometer

Designed by b round rod lens, sample stage with a load-bearing track, and add a wheel-type frame, can weight 1-30kg,2-6 inches in diameter (can be increased to 8 inches).500mm length of the crystal rod, the sample plus there is a vacuum suction device platform, the model goniometer in the measurement, the crystal can roller rotating rod, which measures the angle of crystal rod end, but also measure the sheet surface of the chip TD-type goniometer

This type of post-wafer crystal goniometer measurement reference plane designed sample stage equipped with breathing devices, measure 2-8 inches above the sheet 0.5mm thick sample

x-ray crystal orientation analyzer

x-ray tube              Cu target

tube voltage          30kVP

tube current            0-5Ma

sample rotate angle   -10º to +50º

counter rotate angle    -10º to +50º

tube voltage of counter   500V-1100V

time constant          0.1second,0.4second,3second

slit                  4´and 5´ and 6´

x-ray crystal orientation analyzer



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.